Product Overview

A slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. Also called a rotary electrical joint, collector or electric swivel, a slip ring can be used in any electromechanical system that requires unrestrained, intermittent or continuous rotation while transmitting power, analog, digital, or RF signals and/or data. It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints. How a slip ring works.

While the primary goal of the slip ring is to transmit power and electrical signals, the physical dimensions, operating environment, rotating speeds and economic constraints often affect the type of packaging that must be employed.

The customer’s requirements and cost objectives are critical elements in driving the decisions that lead to the development of a successful slip ring design. The four key elements are:

  • Electrical Specifications
  • Mechanical Packaging
  • Operating Environment
  • Cost

Electrical Specifications

Slip rings are used to transmit power, analog, RF signals and data through a rotating member. The number of circuits, types of signals, and the electrical noise immunity requirements of the system play an important role in the determination of the physical design constraints imposed upon the slip ring design. High power circuits, for example, require larger conductive paths and greater spacing between the paths to increase dielectric strength. Analog and data circuits, while physically narrower than power circuits, also require care in their design to minimize the effects of cross-talk or interference between signal paths. For low speed, low current applications a Gold-on-Gold brush/ring contact system may be employed. This combination produces the smallest packaging configurations as shown in our small and mid-sized capsule selections. For higher speed and current needs the incorporation of composite Silver Graphite brushes and Silver rings are used. These assemblies normally require larger package sizes and are shown under enclosed power slip rings. Using either method most slip ring circuits exhibit changes in dynamic contact resistance of approximately 5 milliohms.

Mechanical Packaging

The packaging considerations in designing a slip ring are often not as straightforward as the electrical requirements. Many slip ring designs require cabling and other rotating or non-rotating hardware to pass through the slip ring. These requirements often dictate the unit's inner diameter dimensions. Electro-Miniatures offers a variety of signal thru bore units. Other designs require a slip ring to be extremely small from a diameter stand-point, or from a height standpoint. In other cases, the space available for the slip ring is limited, requiring the slip ring components be provided as separates, or that the slip ring be integrated with a motor, position sensor, fiber optic rotary joint, or connectorized, in an integrated package. Over the years Electro-Miniatures has been challenged with many unique packaging requirements.

Operating Environment

The environment that the slip ring is required to operate under has an influence on the slip ring design in many ways. Rotational speed, temperature, pressure, humidity, shock & vibration and exposure to corrosive materials impact the bearing selection, exterior material selection, flange mounts and even cabling choices. As standard practice, Electro-Miniatures utilizes lightweight aluminum housings for its packaged slip rings. Stainless steel housing are heavier, but may be nessary to meet requirements of the slip ring's operating enironment.

Product Families
  Product Key Features

Small Capsules

  • Compact Size
  • Continuous Rotation
  • Moderate Circuit Counts

Mid-Sized Capsules

  • Where Size is not a Constraint
  • Ideal for Signal and Data Transfer
  • Power Circuits Available
  • Connectorization
  • Increased Circuit Counts Available

Enclosed Power Thru-Bore

  • Graduated Inner Bores
  • High Circuit Counts
  • High-Speed Rotation

Enclosed Signal Thru-Bore

  • High Circuit Counts Available
  • Ideal for Signal and Data Transfer
  • Cable Pass-Through Capability

 

Separates Thru-Bore

  • Optimal for Difficult Packaging Environments

Custom Electrical Slip Ring Assemblies

Custom Fiber Optic Rotary Joint/Slip Ring Assemblies

  • Integrated Slip Ring with Motor, Position Sensor, Fiber Optic Rotary Joints and Connectors
  • Ideal for Build-to-Spec and Build-to-Print Requirements
  • Optimized for Cost, Electrical and Mechanical Performance
  • Repair and Refurbishment Services Provided
 
 
Call us at  (201) 460-0510 Follow us on Facebok Follow us on Linkedin